Appreciate quicker cleaning after painting by employing a paint tray liner. After you are finished painting, you can pour any residual paint into the paint can. Carefully rinsing your paint tray lining will allow you to reuse it many times.



One of the main parts of a renovation or new build is to use primers and paints which are oil-based or latex. New builds often count on latex primer on the walls. If you are painting over the surface of any previous water discoloration or wallpaper glue deposits that is unable to come off, an oil-based primer named “Kilz” will seal your walls. Kilz is perfect for sealing mildew and heavy staining. It is an excellent product if you will be painting over top of oil-based wood stain which can seep through layers of paint. Primer is essential in many scenarios.

Working with a metal paint tray is widespread for many individuals using a primer. The oil-based primer usually occupies the metal paint tray and a tray liner is used for latex paint in the exact tray after to prevent oil and water mixing. Wash and dry your paint tray liner extensively after use to keep it for many years. Refer to the instructions for cleaning located on your paint can and rinse your paintbrushes with your paint tray liner at the end of the job.

STORE-BOUGHT TRAY LINERS Vs. DIY

The pre-formed, plastic paint tray liners are inexpensive. They are designed to fit into your paint tray. Unfortunately, most individuals assume they are single-use-only and disposable. However, save the planet and just wash them when you are finished! They can last you for several years of painting tasks. Don’t reuse a paint tray liner that has not been properly cleaned. The residual paint will chip off and get into your new paint, destroying everything. There will be bits of old paint strewn throughout your new paint, messing up your potential for a flawless finish. This can be completely avoided if you get into the habit of rinsing your paint tray liner.

Some DIY paint tray liner ideas could easily get you through your next painting gig.

Avoid the potential for disaster by simply cleaning your paint tray liner diligently after each use.

Aluminum Foil paint tray liner DIY

Estimate a sheet of aluminum foil that's six inches larger than your paint tray. Place the aluminum foil in the corners of your paint tray. Gently crease the aluminum over the paint tray’s edge. This particular liner is very delicate. Care must be given not to rip the foil considering that it tears without much rubbing. The packed paint roller sleeve often clings to the foil. Take care not to roll bits of foil into your painting project. This makes it difficult rely on aluminum foil for significant projects such as an entire room. Afterward, pour the leftover paint into the can. Carefully collect the aluminum foil by rolling it together and throw it in the trash can when finished.



DIY PAINT TRAY LINER WITH PLASTIC BAGS

A kitchen waste bag or a throwaway plastic shopping bag may be your paint tray liner. Place the paint tray into your plastic bag. Then, rotate the tray over and tape the bag’s unfastened ends in place with either masking tape or painter’s tape. Pour excess paint back into the can should you have any left inside your tray after painting.

Tidying up with this strategy is simple. Simply pull the bag off inside out from the paint tray and throw away. If you don’t want to wash and re-use your paint roller, you can add it into the plastic bag. Utilize the bag to pull the roller sleeve off of the cage. It's really an easy strategy to help you avoid unnecessary paint exposure. Next, make sure to tie your plastic bag shut prior to placing it into the garbage. Next, be certain to tie your plastic bag shut before putting it into the garbage.

Are paint tray liners vital to your painting operation?

In fact, you don’t really need a paint tray liner. It is not uncommon for a bunch of folks to directly pour their paint into their tray. After you are done, pour the remaining paint back into the can. You could opt to permit the paint to dry instead of washing your tray out. As layers of paint collect, your paint tray will become heavy. Carefully and effectively washing your paint tray is the perfect choice. Some people argue that the new paint will dissolve the previously hardened layers and trigger paint bits to get stuck in the roller and destroy your smooth finish.

Liners tend to be a safer option for oil-based paints because they need solvents for cleanup. But, if you work with latex, you can avoid the liner since you will have to wash your paintbrushes with water right after. Immediately fill your paint tray with water and incorperate your brushes or rollers to soak as soon as you finish with your latex paint to simplify cleanup. Have fun with your painting experience no matter what route you take.